You're viewing version 1.1 of the OpenSearch documentation. This version is no longer maintained. For the latest version, see the current documentation. For information about OpenSearch version maintenance, see Release Schedule and Maintenance Policy.

Apply changes using securityadmin.sh

The security plugin stores its configuration—including users, roles, and permissions—in an index on the OpenSearch cluster (.opendistro_security). Storing these settings in an index lets you change settings without restarting the cluster and eliminates the need to edit configuration files on every single node.

To initialize the .opendistro_security index, however, you must run plugins/opensearch-security/tools/securityadmin.sh. This script loads your initial configuration into the index using the configuration files in plugins/opensearch-security/securityconfig. After the .opendistro_security index is initialized, use OpenSearch Dashboards or the REST API to manage your users, roles, and permissions.

A word of caution

If you make changes to the configuration files in plugins/opensearch-security/securityconfig, OpenSearch does not automatically apply these changes. Instead, you must run securityadmin.sh to load the updated files into the index.

Running securityadmin.sh overwrites one or more portions of the .opendistro_security index. Run it with extreme care to avoid losing your existing resources. Consider the following example:

1. You initialize the .opendistro_security index.
2. You create ten users using the REST API.
3. You decide to create a new reserved user using internal_users.yml.
4. You run securityadmin.sh again to load the new reserved user into the index.
5. You lose all ten users that you created using the REST API.

To avoid this situation, back up your current configuration before making changes and re-running the script:

./securityadmin.sh -backup my-backup-directory \
  -icl \
  -nhnv \
  -cacert ../../../config/root-ca.pem \
  -cert ../../../config/kirk.pem \
  -key ../../../config/kirk-key.pem

If you use the -f argument rather than -cd, you can load a single YAML file into the index rather than the entire directory of YAML files. For example, if you create ten new roles, you can safely load internal_users.yml into the index without losing your roles; only the internal users get overwritten.

./securityadmin.sh -f ../securityconfig/internal_users.yml \
  -t internalusers \
  -icl \
  -nhnv \
  -cacert ../../../config/root-ca.pem \
  -cert ../../../config/kirk.pem \
  -key ../../../config/kirk-key.pem

To resolve all environment variables before applying the security configurations, use the -rev parameter.

./securityadmin.sh -cd ../securityconfig/ \
 -rev \
 -cacert ../../../root-ca.pem \
 -cert ../../../kirk.pem \
 -key ../../../kirk.key.pem

Here’s an example of an environment variable in the config.yml file:

password: ${env.LDAP_PASSWORD}

Configure the admin certificate

In order to use securityadmin.sh, you must add the distinguished names (DNs) of all admin certificates to opensearch.yml. If you use the demo certificates, for example, opensearch.yml might contain the following lines for the kirk certificate:

plugins.security.authcz.admin_dn:
  - CN=kirk,OU=client,O=client,L=test,C=DE

You can’t use node certificates as admin certificates. The two must be separate. Also, do not add whitespace between the parts of the DN.

Basic usage

The securityadmin.sh tool can be run from any machine that has access to the transport port of your OpenSearch cluster (the default port is 9300). You can change the security plugin configuration without having to access your nodes through SSH.

Each node also includes the tool at plugins/opensearch-security/tools/securityadmin.sh. You might need to make the script executable before running it:

chmod +x plugins/opensearch-security/tools/securityadmin.sh

To print all available command line options, run the script with no arguments:

./plugins/opensearch-security/tools/securityadmin.sh

To load your initial configuration (all YAML files), you might use the following command:

./securityadmin.sh -cd ../securityconfig/ -icl -nhnv \
  -cacert ../../../config/root-ca.pem \
  -cert ../../../config/kirk.pem \
  -key ../../../config/kirk-key.pem

• The -cd option specifies where the security plugin configuration files can be found.
• The -icl (--ignore-clustername) option tells the security plugin to upload the configuration regardless of the cluster name. As an alternative, you can also specify the cluster name with the -cn (--clustername) option.
• Because the demo certificates are self-signed, this command disables hostname verification with the -nhnv (--disable-host-name-verification) option.
• The -cacert, -cert and -key options define the location of your root CA certificate, the admin certificate, and the private key for the admin certificate. If the private key has a password, specify it with the -keypass option.

The following table shows the PEM options.

Sample commands

Apply all YAML files in securityconfig using PEM certificates:

/usr/share/opensearch/plugins/opensearch-security/tools/securityadmin.sh \
  -cacert /etc/opensearch/root-ca.pem \
  -cert /etc/opensearch/kirk.pem \
  -key /etc/opensearch/kirk-key.pem \
  -cd /usr/share/opensearch/plugins/opensearch-security/securityconfig/

Apply a single YAML file (config.yml) using PEM certificates:

./securityadmin.sh \
  -f ../securityconfig/config.yml \
  -icl -nhnv -cert /etc/opensearch/kirk.pem \
  -cacert /etc/opensearch/root-ca.pem \
  -key /etc/opensearch/kirk-key.pem \
  -t config

Apply all YAML files in securityconfig with keystore and truststore files:

./securityadmin.sh \
  -cd /usr/share/opensearch/plugins/opensearch-security/securityconfig/ \
  -ks /path/to/keystore.jks \
  -kspass changeit \
  -ts /path/to/truststore.jks \
  -tspass changeit
  -nhnv
  -icl

Using securityadmin with keystore and truststore files

You can also use keystore files in JKS format in conjunction with securityadmin.sh:

./securityadmin.sh -cd ../securityconfig -icl -nhnv
  -ts <path/to/truststore> -tspass <truststore password>
  -ks <path/to/keystore> -kspass <keystore password>

Use the following options to control the key and truststore settings.

OpenSearch settings

If you run a default OpenSearch installation, which listens on transport port 9300 and uses opensearch as a cluster name, you can omit the following settings altogether. Otherwise, specify your OpenSearch settings by using the following switches.

Certificate validation settings

Use the following options to control certificate validation.

Configuration files settings

The following switches define which configuration files you want to push to the security plugin. You can either push a single file or specify a directory containing one or more configuration files.

To upload all configuration files in a directory, use this:

./securityadmin.sh -cd ../securityconfig -ts ... -tspass ... -ks ... -kspass ...

If you want to push a single configuration file, use this:

./securityadmin.sh -f ../securityconfig/internal_users.yml -t internalusers  \
    -ts ... -tspass ... -ks ... -kspass ...

The file type must be one of the following:

• config
• roles
• rolesmapping
• internalusers
• actiongroups

Cipher settings

You probably won’t need to change cipher settings. If you need to, use the following options.

Backup, restore, and migrate

You can download all current configuration files from your cluster with the following command:

./securityadmin.sh -backup my-backup-directory -ts ... -tspass ... -ks ... -kspass ...

This command dumps the current security plugin configuration from your cluster to individual files in the directory you specify. You can then use these files as backups or to load the configuration into a different cluster. This command is useful when moving a proof-of-concept to production or if you need to add additional reserved or hidden resources:

./securityadmin.sh \
  -backup my-backup-directory \
  -icl \
  -nhnv \
  -cacert ../../../config/root-ca.pem \
  -cert ../../../config/kirk.pem \
  -key ../../../config/kirk-key.pem

To upload the dumped files to another cluster:

./securityadmin.sh -h production.example.com -p 9301 -cd /etc/backup/ -ts ... -tspass ... -ks ... -kspass ...

To migrate configuration YAML files from the Open Distro for Elasticsearch 0.x.x format to the OpenSearch 1.x.x format:

./securityadmin.sh -migrate ../securityconfig -ts ... -tspass ... -ks ... -kspass ...

Other options