You're viewing version 2.5 of the OpenSearch documentation. This version is no longer maintained. For the latest version, see the current documentation. For information about OpenSearch version maintenance, see Release Schedule and Maintenance Policy.

Take and restore snapshots

Snapshots aren’t instantaneous. They take time to complete and do not represent perfect point-in-time views of the cluster. While a snapshot is in progress, you can still index documents and send other requests to the cluster, but new documents and updates to existing documents generally aren’t included in the snapshot. The snapshot includes primary shards as they existed when OpenSearch initiated the snapshot. Depending on the size of your snapshot thread pool, different shards might be included in the snapshot at slightly different times.

OpenSearch snapshots are incremental, meaning that they only store data that has changed since the last successful snapshot. The difference in disk usage between frequent and infrequent snapshots is often minimal.

In other words, taking hourly snapshots for a week (for a total of 168 snapshots) might not use much more disk space than taking a single snapshot at the end of the week. Also, the more frequently you take snapshots, the less time they take to complete. Some OpenSearch users take snapshots as often as every 30 minutes.

If you need to delete a snapshot, be sure to use the OpenSearch API rather than navigating to the storage location and purging files. Incremental snapshots from a cluster often share a lot of the same data; when you use the API, OpenSearch only removes data that no other snapshot is using.

Table of contents

1. Register repository
   1. Shared file system
   2. Amazon S3
2. Take snapshots
3. Restore snapshots
   1. Conflicts and compatibility
4. Security considerations

Register repository

Before you can take a snapshot, you have to “register” a snapshot repository. A snapshot repository is just a storage location: a shared file system, Amazon S3, Hadoop Distributed File System (HDFS), Azure Storage, etc.

Shared file system

1. To use a shared file system as a snapshot repository, add it to opensearch.yml:

   path.repo: ["/mnt/snapshots"]
   

   On the RPM and Debian installs, you can then mount the file system. If you’re using the Docker install, add the file system to each node in docker-compose.yml before starting the cluster:

   volumes:
     - /Users/jdoe/snapshots:/mnt/snapshots
   

2. Then register the repository using the REST API:

   PUT /_snapshot/my-fs-repository
   {
     "type": "fs",
     "settings": {
       "location": "/mnt/snapshots"
     }
   }
   

You will most likely not need to specify any parameters except for location. For allowed request parameters, see Register or update snapshot repository API.

Amazon S3

1. To use an Amazon S3 bucket as a snapshot repository, install the repository-s3 plugin on all nodes:

   sudo ./bin/opensearch-plugin install repository-s3
   

   If you’re using the Docker installation, see Working with plugins. Your Dockerfile should look something like this:

   FROM opensearchproject/opensearch:2.5.0
   
   ENV AWS_ACCESS_KEY_ID <access-key>
   ENV AWS_SECRET_ACCESS_KEY <secret-key>
   
   # Optional
   ENV AWS_SESSION_TOKEN <optional-session-token>
   
   RUN /usr/share/opensearch/bin/opensearch-plugin install --batch repository-s3
   RUN /usr/share/opensearch/bin/opensearch-keystore create
   
   RUN echo $AWS_ACCESS_KEY_ID | /usr/share/opensearch/bin/opensearch-keystore add --stdin s3.client.default.access_key
   RUN echo $AWS_SECRET_ACCESS_KEY | /usr/share/opensearch/bin/opensearch-keystore add --stdin s3.client.default.secret_key
   
   # Optional
   RUN echo $AWS_SESSION_TOKEN | /usr/share/opensearch/bin/opensearch-keystore add --stdin s3.client.default.session_token
   

   After the Docker cluster starts, skip to step 7.

2. Add your AWS access and secret keys to the OpenSearch keystore:

   sudo ./bin/opensearch-keystore add s3.client.default.access_key
   sudo ./bin/opensearch-keystore add s3.client.default.secret_key
   

3. (Optional) If you’re using temporary credentials, add your session token:

   sudo ./bin/opensearch-keystore add s3.client.default.session_token
   

4. (Optional) If you connect to the internet through a proxy, add those credentials:

   sudo ./bin/opensearch-keystore add s3.client.default.proxy.username
   sudo ./bin/opensearch-keystore add s3.client.default.proxy.password
   

5. (Optional) Add other settings to opensearch.yml:

   s3.client.default.endpoint: s3.amazonaws.com # S3 has alternate endpoints, but you probably don't need to change this value.
   s3.client.default.max_retries: 3 # number of retries if a request fails
   s3.client.default.path_style_access: false # whether to use the deprecated path-style bucket URLs.
   # You probably don't need to change this value, but for more information, see https://docs.aws.amazon.com/AmazonS3/latest/dev/VirtualHosting.html#path-style-access.
   s3.client.default.protocol: https # http or https
   s3.client.default.proxy.host: my-proxy-host # the hostname for your proxy server
   s3.client.default.proxy.port: 8080 # port for your proxy server
   s3.client.default.read_timeout: 50s # the S3 connection timeout
   s3.client.default.use_throttle_retries: true # whether the client should wait a progressively longer amount of time (exponential backoff) between each successive retry
   s3.client.default.region: us-east-2 # AWS region to use. For non-AWS S3 storage, this value is required but has no effect.
   

6. (Optional) If you don’t want to use AWS access and secret keys, you could configure the S3 plugin to use AWS Identity and Access Management (IAM) roles for service accounts:

   sudo ./bin/opensearch-keystore add s3.client.default.role_arn
   sudo ./bin/opensearch-keystore add s3.client.default.role_session_name
   

   If you don’t want to configure AWS access and secret keys, modify the following opensearch.yml setting. Make sure the file is accessible by the repository-s3 plugin:

   s3.client.default.identity_token_file: /usr/share/opensearch/plugins/repository-s3/token
   

   If copying is not an option, you can create a symlink to the web identity token file in the ${OPENSEARCH_PATH_CONFIG} folder:

   ln -s $AWS_WEB_IDENTITY_TOKEN_FILE "${OPENSEARCH_PATH_CONFIG}/aws-web-identity-token-file"
   

   You can reference the web identity token file in the following opensearch.yml setting by specifying the relative path that is resolved against ${OPENSEARCH_PATH_CONFIG}:

   s3.client.default.identity_token_file: aws-web-identity-token-file
   

   IAM roles require at least one of the above settings. Other settings will be taken from environment variables (if available): AWS_ROLE_ARN, AWS_WEB_IDENTITY_TOKEN_FILE, AWS_ROLE_SESSION_NAME.

7. If you changed opensearch.yml, you must restart each node in the cluster. Otherwise, you only need to reload secure cluster settings:

   POST /_nodes/reload_secure_settings
   

8. Create an S3 bucket if you don’t already have one. To take snapshots, you need permissions to access the bucket. The following IAM policy is an example of those permissions:

   {
       "Version": "2012-10-17",
       "Statement": [{
           "Action": [
               "s3:*"
           ],
           "Effect": "Allow",
           "Resource": [
               "arn:aws:s3:::your-bucket",
               "arn:aws:s3:::your-bucket/*"
           ]
       }]
   }
   

9. Register the repository using the REST API:

   PUT /_snapshot/my-s3-repository
   {
     "type": "s3",
     "settings": {
       "bucket": "my-s3-bucket",
       "base_path": "my/snapshot/directory"
     }
   }
   

You will most likely not need to specify any parameters except for bucket and base_path. For allowed request parameters, see Register or update snapshot repository API.

Take snapshots

You specify two pieces of information when you create a snapshot:

• Name of your snapshot repository
• Name for the snapshot

The following snapshot includes all indices and the cluster state:

PUT /_snapshot/my-repository/1

You can also add a request body to include or exclude certain indices or specify other settings:

PUT /_snapshot/my-repository/2
{
  "indices": "opensearch-dashboards*,my-index*,-my-index-2016",
  "ignore_unavailable": true,
  "include_global_state": false,
  "partial": false
}

If you request the snapshot immediately after taking it, you might see something like this:

GET /_snapshot/my-repository/2
{
  "snapshots": [{
    "snapshot": "2",
    "version": "6.5.4",
    "indices": [
      "opensearch_dashboards_sample_data_ecommerce",
      "my-index",
      "opensearch_dashboards_sample_data_logs",
      "opensearch_dashboards_sample_data_flights"
    ],
    "include_global_state": true,
    "state": "IN_PROGRESS",
    ...
  }]
}

Note that the snapshot is still in progress. If you want to wait for the snapshot to finish before continuing, add the wait_for_completion parameter to your request. Snapshots can take a while to complete, so consider whether or not this option fits your use case:

PUT _snapshot/my-repository/3?wait_for_completion=true

Snapshots have the following states:

You can’t take a snapshot if one is currently in progress. To check the status:

GET /_snapshot/_status

Restore snapshots

The first step in restoring a snapshot is retrieving existing snapshots. To see all snapshot repositories:

GET /_snapshot/_all

To see all snapshots in a repository:

GET /_snapshot/my-repository/_all

Then restore a snapshot:

POST /_snapshot/my-repository/2/_restore

Just like when taking a snapshot, you can add a request body to include or exclude certain indices or specify some other settings:

POST /_snapshot/my-repository/2/_restore
{
  "indices": "opensearch-dashboards*,my-index*",
  "ignore_unavailable": true,
  "include_global_state": false,
  "include_aliases": false,
  "partial": false,
  "rename_pattern": "opensearch-dashboards(.+)",
  "rename_replacement": "restored-opensearch-dashboards$1",
  "index_settings": {
    "index.blocks.read_only": false
  },
  "ignore_index_settings": [
    "index.refresh_interval"
  ]
}

Conflicts and compatibility

One way to avoid naming conflicts when restoring indices is to use the rename_pattern and rename_replacement options. Then, if necessary, you can use the _reindex API to combine the two. The simpler way is to delete existing indices prior to restoring from a snapshot.

You can use the _close API to close existing indices prior to restoring from a snapshot, but the index in the snapshot has to have the same number of shards as the existing index.

We recommend ceasing write requests to a cluster before restoring from a snapshot, which helps avoid scenarios such as:

1. You delete an index, which also deletes its alias.
2. A write request to the now-deleted alias creates a new index with the same name as the alias.
3. The alias from the snapshot fails to restore due to a naming conflict with the new index.

Snapshots are only forward-compatible by one major version. If you have an old snapshot, you can sometimes restore it into an intermediate cluster, reindex all indices, take a new snapshot, and repeat until you arrive at your desired version, but you might find it easier to just manually index your data on the new cluster.

Security considerations

If you’re using the Security plugin, snapshots have some additional restrictions:

• To perform snapshot and restore operations, users must have the built-in manage_snapshots role.
• You can’t restore snapshots that contain global state or the .opendistro_security index.

If a snapshot contains global state, you must exclude it when performing the restore. If your snapshot also contains the .opendistro_security index, either exclude it or list all the other indices you want to include:

POST /_snapshot/my-repository/3/_restore
{
  "indices": "-.opendistro_security",
  "include_global_state": false
}

The .opendistro_security index contains sensitive data, so we recommend excluding it when you take a snapshot. If you do need to restore the index from a snapshot, you must include an admin certificate in the request:

curl -k --cert ./kirk.pem --key ./kirk-key.pem -XPOST 'https://localhost:9200/_snapshot/my-repository/3/_restore?pretty'

We strongly recommend against restoring .opendistro_security using an admin certificate because doing so can alter the security posture of the entire cluster. See A word of caution for a recommended process to back up and restore your Security plugin configuration.